Brilldea

• Check out our "Controllable RGB LED system for your home or office" over at Instructables.

• No inspirational pages at this time.

• Living Room LED Display Application Note Rev 01.0. There is a downloadable PDF and a video that covers the various aspects of the design for the living room LED display shown in this video. The PDF contains schematics, diagrams, and high resolution images of the effect and system setup. The system shown uses two pieces of the 16 Ch. RGB TLC5940 Driver PCB which we currently do not stock. Instead we recommend the newer LED Painter, Prop Blade and RGB LED components to create the system.
• The presentations from the Unofficial Propeller Expo - North East. Building an LED Light Show, Product show loop (shown at the Brilldea table), and the unseen, Chinese Electronic Market.
• USB Powered uOLED-PROP Application Note Rev 01.0. Check out how we took a uOLED-96-PROP and wired it to a USB port for power. Downloadable PDF

• uOLED-IOC Example SPIN Software Ver 01.1 (ZIP) This software demonstrates the use of the SPIN driver for reading and writing to the PCA9555. This video shows the software in action.
• 8-bit per pixel ASM graphics driver for uOLED-96-PROP Ver 01.0 (ZIP) This software package contains two pieces of software. One piece is a blazing fast display driver for the OLED display that is written in ASM. The other is a a collection of graphics routines (line, circle, sprite, etc) written in SPIN. Each piece of software works for 256 colors on the display. This video shows the software in action.
• Living Room LED Display Controller Ver 01.0 (ZIP) This software package contains a program for controlling the living room led display shown in this video. Most of the software is written in SPIN. Included is a simple object for writing data to the TLC5940 LED driver IC.
• DMX-512A Receiving Driver Ver 01.4 (ZIP) This piece of software is an ASM driver for receiving a full 513 bytes of a DMX-512A packet. Included in the file is a brief demonstration program. This driver was used in this living room LED display.
• Prop Blade Switches Driver Ver 01.1 (SPIN) This piece of software is for the Prop Blade. This software sequences the bank outputs and reads the switch inputs for the 10 position DIP switch and the 5 tactile buttons.
• Prop Blade controlling an LED Painter Demo Ver 00.1 (SPIN) This little piece of software will help you to get started with the Prop Blade controller. The software provides a framework for using the Prop Blade as a controller of LED Painters.
• Prop Blade controlling an LED Painter Demo Ver 01.0 via DMX (SPIN/ASM) Here is another example for those using the Prop Blade and LED Painter combo. This one shows how to use the Brilldea DMX driver to receive DMX and control the LEDs.

E-mail

• Sales Department E-mail Address
• Support Department E-mail Address

Resources

• Brilldea YouTube Channel
• Brilldea Flickr Photostream
• Brilldea Bookstore
• SX Microcontroller Blog
• Propeller Object Exchange
• CircuitPeople
• PCBCart